ציפוי מראה ללא דבק להחשכת החלון מבחוץ. מגן על החלון וקל להתקנה.

תיאור

LUCKYYJ One Way Mirror Film—Give You Enough Privacy Protection&Solar Control

● Do you come across following troubles?

During daytime, people look at the house when passing by?

Harmful UV rays make the furniture fade and hurt your skin?

Because of the direct and strong glare, the room gets hot and you need to pay higher electricity bill?

● How will the black one way mirror film help to deal with these problems?

During daytime, you can get great privacy protection because people outside can’t see through the window of mirror effect.

This reflective mirror film can block out 98% UV rays and 85% infrared rays, which helps to protect the furniture and people.

With the rejection of 90% visible light, it can soften the strong sunlight and keep the room cool.

● What features does this reflective window cling have?

Magical Mirror Effect: The one way mirror window cling features the mirror effect on the brighter side. In the Daytime, it’s on the outside window to provide privacy, while it’s reversed at night.

UV Rejection&Glare Control: It can reflect most of UV rays and strong sunlight back to protect you and block out heat.

Easy Installation: It’s more easily to apply the film on the window. It becomes non-sticky after being wet with lots of water. After dried up, it would stick strongly to the window.

Comfortable&Economical: Anti UV and Anti Glare

No worries about the hot strong sunlight! The one way window film can block up to most of the harmful UV rays and infrared rays, also visible light. It helps to prevent furniture fading and save your energy bills

Privacy Matters: Mirror Effect and Daytime Privacy

In the daytime, when the exterior light is stronger than the interior light, the outside glass will show mirror effect. Therefore, people are not able to see in, and your home privacy is then ensured with a great view of the outside scenery sitting at home.

Suitable for Most Places: Home and Office

You can apply it on windows in your home, such as living room, kitchen, study room, or in your office, like meeting room.

Installation Instructions:

1. Clean the window carefully and keep the glass surface clean and smooth.

2. Measure the actual size of the glass.Cut films to the required size you need.

3. Spray a lot of water on the window, the more, the better.

4. Peel off the backing paper(transparent film)and make sure that the window film is not wrinkled when the backing film removed.

5. Carefully remove excess water and air from top to bottom with a scraper. Otherwise, the window film will easily fall off.

• NOTE: Check if all the air and water are scraped out, check if the corners are sticky, then dry the window with a dry towel. If you notice that the corners are raised during the final inspection, you can lift a corner from the edge, re-water spray and paste, and then scrape the air bubbles.